industrial-lubricants-hero

NEW ERA: INDUSTRIAL LUBRICANTS

Diamond Grind – Grinding Fluid

Diamond Grind is a water soluble, fully synthetic, nitrate free, grinding fluid for ferrous and non-ferrous materials. Diamond Grind GF is a fully synthetic low odour grinding fluid product that does not contain mineral oil. Its innovative fluidity package offers excellent wetting and wheel flushing characteristics and it will not foam even under the most severe circumstances. It offers excellent work piece visibility and is highly resistant to bacterial and fungal degradation. 

Ruby Cut – Cutting Oil

Ruby Cut is a semi-synthetic cutting oil, manufactured from special emulsifying materials and selected extreme pressure additives to produce a metal working coolant of outstanding quality. It will provide lubrication under extreme conditions and facilitate the rapid removal of heat from the work piece. A very effective bactericide is incorporated into the formulation to provide protection against micro- biological spoilage.

Pearl Cut 101 – Cutting Oil

Pearl-Cut 101 is a water-mix cutting fluid which forms a milky type emulsion when mixed with water. This improved product possesses greater biostability for extended sump life, greatly improved rust protection, consistent pH in a variety of water types and improved miscibility (spontaneity) when added to water. Pearl-Cut 101 is suitable for a wide range of non-arduous machining operations on both ferrous and non-ferrous materials where a cost effective, general purpose coolant is required.

Emerald Cut – Semi-Synthetic Oil

Emerald Cut is the latest technology in cutting fluids for all water conditions. It is a semi-synthetic oil product which when mixed with water forms a translucent emulsion that is completely stable and long lasting. Its bio-stable properties mean that the emulsion does not degrade or produce bad odours, and the emulsion needs little or no maintenance. The formulation does not contain cresols, phenols, chlorine or nitrites. Rust and corrosion protection is outstanding, and no sticky residues or sludge’s are deposited on machine parts. Emerald Cut gives an extremely good machining performance and excellent surface finish on a wide range of materials.

Neocut 632 – Mineral Oil

Neocut 632 is a product of today’s new technology providing the desired extreme pressure requirements with light colour. Neocut 632 has been developed for a wide range of machining operations on automatics and general machine tools. A blend of high quality mineral oil with chlorine additive and sulpherized fatty ester. The combined additives ensure that boundary lubrication is preserved over a wider range of frictional temperatures, providing excellent surface finish, exceptional tool life and the elimination of chip welding. Neocut 632 is light in colour, and provides excellent work piece visibility. It is of low odour and contains anti-mist agents.

Dieletic Fluid – Errosion Oil

DiElectric Fluid is low viscosity spark erosion oil. Manufactured using high quality, low viscosity hydrocarbon base oils. Which are virtually colourless and their low aromatic content promotes low odour and low fume generation. Offering long fluid life and good operator acceptability.

NEW ERA: MACHINE LUBRICANTS

Neogear EP Range – Gear Oil

Neogear Ep Range are specifically designed for the lubrication of industrial enclosed gears. A comprehensive range, embracing the whole spectrum of industrial gearbox needs, from units on small conveyors to those used in metal rolling mills. High load carrying capabilities through anti-wear protection is a critical feature of a superior industrial gear oil. In addition, modern gearboxes are now expected to transmit higher horsepower’s through more compact units; they therefore run at higher temperatures. New Era Neogear EP Industrial Gear Oils are designed to resist high temperature degradation and can be operated at temperatures up to 150ºC. They provide excellent protection against rust, resist the formation of foam and their light colour allows easy reading of oil levels in site glass indicators.

Neoglide – Slideways Oil

Neoglide is a range of specially designed Slideway oils / lubricants. To be efficient, machine tool slideways must be parallel with the machine bed. Any tendency towards irregular oil film pressure and ‘slip stick’ action must be avoided as this adversely affects the machining operations. The range of Slideway oils have been manufactured from carefully selected base oils and anti-wear, extreme pressure and anti-corrosion additives. They also include special tacky and lubricity additives, which afford good lubricity even at low traverse speeds.

Neolube Range – Machine Oil

Neolube Range of Industrial Machine Oils are high quality non EP machine and gear oils. Formulated from the finest quality solvent refined base oils of high viscosity index, Neolube has excellent thermal stability and high load carrying capabilities. The presence of extreme pressure additives in gearbox oils may cause gear problems due to incompatible frictional effects of the EP additive. Because New Era Neolube Industrial Machine Oils are formulated without EP additives and have exceptional low foaming characteristics they ensure improved smoothness and reliability in units manufactured to operate without the need for EP additives, especially where there is a high presence of phosphor bronze type bearings.

PETRONAS: HYDRAULIC OILS

PLI HYDRAULIC OIL 32

Petronas Hydraulic Series are premium quality anti-wear hydraulic oils specially developed to provide multi-metal compatibility and improved wear protection in heavy-duty service hydraulic systems. Petronas Hydraulic Series Oils are recommended for use in hydraulic systems, in industrial, marine and mobile service, particularly where the manufacturer specifies the use of anti-wear hydraulic fluids to cater for highly stressed pumps delivering large volumes at high pressures and temperatures.

PLI HYDRAULIC OIL 46

Petronas Hydraulic Series are premium quality anti-wear hydraulic oils specially developed to provide multi-metal compatibility and improved wear protection in heavy-duty service hydraulic systems. Petronas Hydraulic Series Oils are recommended for use in hydraulic systems, in industrial, marine and mobile service, particularly where the manufacturer specifies the use of anti-wear hydraulic fluids to cater for highly stressed pumps delivering large volumes at high pressures and temperatures.

PLI HYDRAULIC OIL 68

Petronas Hydraulic Series are premium quality anti-wear hydraulic oils specially developed to provide multi-metal compatibility and improved wear protection in heavy-duty service hydraulic systems. Petronas Hydraulic Series Oils are recommended for use in hydraulic systems, in industrial, marine and mobile service, particularly where the manufacturer specifies the use of anti-wear hydraulic fluids to cater for highly stressed pumps delivering large volumes at high pressures and temperatures.

PLI HYDRAULIC OIL HV 32

Petronas Hydraulic HV Series are premium performance anti-wear hydraulic fluids specially developed for a wide range of mobile and industrial hydraulic equipment operating under normal to heavy duty conditions, subjected to high variations in operating and/or ambient temperatures, including cold start-ups. Petronas Hydraulic HV fluids provide high anti-wear protection, more stable performance across wide temperature range as compared to normal viscosity index products and over 3x longer lasting performance.

PLI HYDRAULIC OIL HV 46

Petronas Hydraulic HV Series are premium performance anti-wear hydraulic fluids specially developed for a wide range of mobile and industrial hydraulic equipment operating under normal to heavy duty conditions, subjected to high variations in operating and/or ambient temperatures, including cold start-ups. Petronas Hydraulic HV fluids provide high anti-wear protection, more stable performance across wide temperature range as compared to normal viscosity index products and over 3x longer lasting performance.

77: HYDRAULIC OILS

HYDRAULIC OIL HM 22

HYDRAULIC OIL HM 22 is a high performance anti wear hydraulic oil developed for use in high pressure hydraulic systems operating under moderate to severe conditions in mobile and industrial services. HYDRAULIC OIL HM 22 oil is formulated with carefully selected base stocks fortified with additives to provide excellent protection towards wear, rust and oxidation.

HYDRAULIC OIL HM 32

HYDRAULIC OIL HM 32 is a high performance anti wear hydraulic oil developed for use in high pressure hydraulic systems operating under moderate to severe conditions in mobile and industrial services. HYDRAULIC OIL HM 32 oil is formulated with carefully selected base stocks fortified with additives to provide excellent protection towards wear, rust and oxidation.

HYDRAULIC OIL HM 46

HYDRAULIC OIL HM 46 is a high performance anti wear hydraulic oil developed for use in high pressure hydraulic systems operating under moderate to severe conditions in mobile and industrial services. HYDRAULIC OIL HM 46 oil is formulated with carefully selected base stocks fortified with additives to provide excellent protection towards wear, rust and oxidation.

HYDRAULIC OIL HM 68

HYDRAULIC OIL HM 68 is a high performance anti wear hydraulic oil developed for use in high pressure hydraulic systems operating under moderate to severe conditions in mobile and industrial services. HYDRAULIC OIL HM 68 oil is formulated with carefully selected base stocks fortified with additives to provide excellent protection towards wear, rust and oxidation.

REQUEST A QUOTE